產品描述
平衡梁的原理：通過內部CAN總線網絡將傳感器-超聲波滑靴組合起來，進而檢測路面的不同位置，再將檢測的數據進行智能篩選與處理，最后將處理后的數據送給控制器，控制器根據數據判斷當前攤鋪機的工作狀態，進而輸出對攤鋪機找平液壓系統的控制信號，至此達到自動找平之目的。
免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.
企業介紹
公司供應攤鋪機配件，壓路機配件，銑刨機配件，攤鋪機刮板驅動軸，刮板驅動軸總成，找平儀，找平儀支架以及液壓泵和配件。還供應攤鋪機易損件，攤鋪機平衡梁，攪龍軸，踏板，輸料底板，葉片，熨平板，減速機，鏈軌，履帶板，支重輪，刮板大鏈條，輸料鏈條等。
聯系人：梁經理
聯系方式：13645201509
（微信同號）
QQ：2870202745
QQ郵箱：2870202745@qq.com
網易郵箱：LS13645201509@163.com
The principle of balanced beam: By combining sensors and ultrasonic shoes through an internal CAN bus network, different positions of the road surface are detected, and the detected data is intelligently screened and processed. Finally, the processed data is sent to the controller, which determines the working status of the current paver based on the data and outputs control signals for the leveling hydraulic system of the paver, achieving the goal of automatic leveling.
Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it
Enterprise Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, balance beams, agitator shafts, pedals, feeding soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, feeding chains, etc.
Contact person: Manager Liang
Contact information: 13645201509
(Same WeChat account)
QQ: 2870202745
QQ email: 2870202745@qq.com
NetEase email: LS13645201509@163.com
您的專屬咨詢顧問：梁經理
地址：江蘇省徐州市礦山路
備案號：05039780